Easy Way Applicator

When using the easy way to finish a basketball court with oil, be sure that you’re taking these steps to get the job done right.

What You Need

  • A Razor Knife
  • Lambs Wool Head
  • A Broom With an Easy Way Applicator
  • Tape

Instructions

Step 1

Make sure you have the right size lambs wool and cut off the extra.
Step 2

Use a screwdriver to push lambswool into the block.
Step 3

Tighten screws.
Step 4

Use tape to remove extra lint.
Step 5

 Attach block to easy way.
Step 6

Fill the easy way up with finish.
Step 7

 Pull the knob to let out a little bit of oil finish to get started.
Step 8

Pull the knob again to open the valve and begin walking backwards across the floor.
Step 9

Stay straight with the grain making sure not to leave any streaks or puddles.
Step 10

Repeat process coming across the floor overlapping 4 in until floor is completely coated.

Recap

    1. Make sure you have the right size lambs wool and cut off the extra.
    1. Use a screwdriver to push lambswool into the block.
    1. Tighten screws.
    1. Use tape to remove extra lint.
    1. Attatch block to easy way.
    1. Fill the easy way up with finish.
    1. Pull the knob to let out a little bit of oil finish to get started.
    1. Pull the knob again to open the valve and begin walking backwards across the floor.
    1. Stay straight with the grain making sure not to leave any streaks or puddles.
  1. Repeat process coming across the floor overlapping 4 in until floor is completely coated.