How to Install a Fan System

Installing a fan system sounds daunting, but don’t worry! We’ll teach you how to do it easily.

What You Need

  • Your Face
  • A Mask

Instructions

Step 1
Drill holes in wall to mount in position.
Step 2
Install ribbed plastic anchors.
Step 3
Place fan system against wall and install anchors and screws
Step 4
Mark area to drill for plastic ribbed anchors.
Step 5
Pre-drill holes for mounting box for conduit.
Step 6
Measure length needed and cut conduit.
Step 7
Remove about 8-10” of conduit.
Step 8

Separate wiring and remove plastic.
Step 9

Install clamp connectors in junction box and tighten nut.
Step 10

Mount conduit to wall with 1”x1” mounting base.
Step 11

Feed wiring through junction box.
Step 12

Mount conduit to wall and tighten clamp connectors in junctions.
Step 13

Strip off wires and prepare for installation.
Step 14

 Insert white wire into breaker for the 110 supply and insert black and green into ground.

Recap

  1. Drill holes in wall to mount in position.
  2. Install ribbed plastic anchors.
  3. Place fan system against wall and install anchors and screws.
  4. Mark area to drill for plastic ribbed anchors.
  5. Pre-drill holes for mounting box for conduit.
  6. Remove about 8-10” of conduit.
  7. Separate wiring and remove plastic.
  8. Install clamp connectors in junction box and tighten nut.
  9. Mount conduit to wall with 1”x1” mounting base.
  10. Feed wiring through junction box.
  11. Mount conduit to wall and tighten clamp connectors in junctions.

  12. Insert white wire into breaker for the 110 supply and insert black and green into ground.